Baxi Eco 3 Wartungshandbuch PDF herunterladen (Seite 25)

11.0 Servicing the Boiler

11 .1 Annual Servicing

1. For reasons of safety and economy, it is

recommended that the boiler is serviced annually.

Servicing must be performed by a competent

person.

2. After servicing, complete the relevant section

of the “Benchmark” Installation, Commissioning

and Service Record Log Book. This should be in

the possession of the user.

3. Ensure that the boiler is cool.

4. Ensure that both the gas and electrical

supplies to the boiler are isolated.

5. Slacken the screws securing the facia panel.

Lift the outercase panel so that its securing tabs

are clear of the facia. Remove the panel (Fig. 47).

6. Remove the screws securing the inner door

panel. Lift the panel slightly to disengage it from

the studs on top of the case (Fig. 48).

7. Note the positions of the two sensing tubes on

the outlet elbow and three wires on the fan motor

and remove them (Fig. 49).

8. Slacken the screws on the outlet sealing collar.

Ease the collar upwards as far as possible

(Fig. 50).

9. Remove the four screws securing the

combustion box door and remove the door

(Fig. 48).

Fig. 47

Fig. 48

Fig. 49

Fig. 50

Facia Panel

Fan Wires

Fan

Sensing Tubes

Outlet Sealing

Collar

Case Front Panel

Combustion

Box Door

Inner Door

Panel

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare

Baxi Eco 3 Wartungshandbuch Seite 25

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Warmwasserbereiter & Kessel Baxi Eco 3