Baxi Solo 2 PF Schnellstart Benutzerhandbuch PDF herunterladen (Seite 39)

10.0Changing Components

10.7 Changing Components (Cont)

1. To change Fan - Pressure Switch - Burner -

Burner Injector - Pilot Burner Injector - Gas

Manifold, proceed as follows:-

2. Release the four latches holding the combustion

box door (Fig. 108). Remove the combustion box

door by pulling forward from the bottom and

unhooking its top edge (Fig. 110).

3. Release the 5-pin electrical plug connecting the

pressure switch and fan (Fig. 109). Withdraw the

fan assembly by pulling forwards from the top

edge (Fig. 110).

10.8 Fan (Fig. 111)

IMPORTANT - 80 PF Models Only. On

appliances up to serial n

8999 use replacement

fan Baxi Part N

229422 G.C.N

364 979.

From serial n

9000 use replacement fan Baxi

Part N

237578 G.C.No 170 615.

1. Disconnect sensing probe from the pressure

switch at rubber tube connector.

2. Disconnect the 2 fan wires from the connection

on the electrical plug. Unscrew bracket securing

sensing probe into top of fan and remove the

sensing probe. Remove the 3 screws securing the

fan to the fan hood.

3. Remove the two screws securing the fan outlet

flange to the fan and remove. Clean all sealing

mastic from the outlet flange.

4. Fit the outlet flange onto the new fan, fix with

the 2 screws and seal the outside gap between the

fan body and the outlet fan with the mastic

provided.

5. Fit the new fan and re-assemble all components

in reverse order of dismantling, reconnect the new

fan wires into the connections on the electrical

plug - either wire can be connected into either

connection.

10.9 Pressure Switch (Fig. 112)

1. Disconnect sensing tube.

2. Remove the screw securing the pressure switch

to its bracket and unhook the pressure switch.

3. Disconnect the 3 electrical terminals from the

pressure switch. Note the position of the tags

before removal and reconnect in correct order.

4. Fit new pressure switch and re-assemble all

components in reverse order of dismantling

ensuring that the electrical terminals are

connected to their correspondingly marked tags.

Grey

Black

White

Fig. 108

Fig. 109

Fig. 110

Fig. 111

Fig. 112

Outlet Flange

Sensing Tube

Fan

1 2 ... 34 35 36 37 38 39 40 41 42 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare

Baxi Solo 2 PF Schnellstart Benutzerhandbuch Seite 39

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kamine Baxi Solo 2 PF