Baxi 828 Bedienungsanleitung

© Baxi Heating U.K. Limited 2006.5121197-02INSTALLER AND OWNER GUIDEModel 828Electric HeaterThis guide is intended to help youinstall and care for you

at a height of 533-560mm (21 inches - 22 inches)(See figure 5). 3. Drill an appropriate size hole in the markedposition.4. Insert a wall plug into the

Method C - Spacer FrameThe optional spacer frame is for use during installations where a chimney recess orrebated fire surround are not available. For

Fitting the Fascia1. Removing the fascia may havemoved the magnets used to fix thefascia to the heater. The magnetsshould be located as in figure 10.2

USING THE HEATERImportant SafetyNever cover the heater or obstruct the openings at the base of the heater, this couldcause overheating and consequent

guarantee.To replace the light bulb(s).1. To gain access to the light bulb/s, remove thetop coal fuel effect and place carefully to oneside.2. Remove

4. I Have a problem that is different to those in the previous examples 1- 3.Following is a list of useful telephone numbersFor general advice about y

the nation’s favourite forPLUMBING & HEATING SUPPLIESSECURE PAYMENTSshop online with confidenceFREE SHIPPINGon all orders over £100 to mainland UK

© Baxi Heating U.K. Limited 2006.All rights reserved. No part of this publication may be reproduced in any material form(including photocopying), stor

Safety First.Baxi Fires Division heaters are CE Approved and designed to meet the appropriateBritish Standards and Safety Marks.Quality and Excellence

HANDLING AND UNPACKINGBefore continuing any further with the installation of this heater please read thefollowing:Important safety instructions.! The

Never! Never leave children unsupervised in a room where the heater is ON and unguarded.! Never obstruct or cover the fan outlet or force items into

Important electrical safety.The heater must notbe located in front of or under an electrical socket, the socket mustalways be accessible in order to d

against the outer edge of the base (See figure 1- Item 1). 1. Gently pinch the sides of the cable guide (See figure 1 - Item 4) and push the cableguid

The heater must be fixed into position to prevent it from being tipped overThe following fixing options are available:! Screw Fixing.! Wire Fixing.!